433MHz 4-Channel RF Remote Duplicator
A compact 4-channel 433MHz RF remote duplicator for copying fixed code garage door, gate, and automation remotes. Compatible with a wide range of common IC chips. Battery included — ready to copy straight out of the box.
Important: This duplicator works with fixed code remotes only. Rolling code remotes are not compatible. Please verify your remote’s IC chip before purchasing.
Key Features
-
4-Channel Copying – Copy up to 4 different remote signals, one per button.
-
433MHz RF Signal – Reliable radio frequency for consistent, responsive operation.
-
Wide IC Chip Compatibility – Works with most common fixed code chips (see list below).
-
Battery Included – Ready to use out of the box.
-
Compact Design – Lightweight keychain-style remote, easy to carry.
Compatible IC Chips
This duplicator can copy remotes containing the following IC chips:
2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), and compatible single-chip microcomputers.
If your remote uses a different chip, it may not be compatible. Check the chip model on your original remote before purchasing, or contact us for guidance.
Compatible Uses
- Garage doors and roller doors
- Electric gates and barriers
- Car central locking and alarm systems
- Home automation and lighting control
How to Copy Your Remote
Step 1 – Clear Existing Code
Press the A and B buttons simultaneously until the LED flashes. Without releasing A, press B three more times until the LED flashes again — the code is now cleared.
Step 2 – Copy
Hold both remotes close together. Press the A button on both remotes simultaneously until the LED lights up — copying is successful. Repeat this process for each button (B, C, D) as needed.
Specifications
-
Frequency: 433MHz
-
Signal Type: RF (Radio Frequency)
-
Channels: 4
-
Code Type: Fixed code only (no rolling code)
-
Battery: Included
What’s in the Box
- 1 × 433MHz 4-Channel RF Remote Duplicator
- Battery included
Frequently Asked Questions
Will this work with my rolling code remote?
No. This duplicator only works with fixed code remotes. Rolling code remotes are not compatible.
How do I know if my remote is compatible?
Open your original remote and check the IC chip model. If it matches one of the chips listed above, this duplicator will work. Contact us if you’re unsure.
Can this be used as a 433mhz auto copy remote control?
Yes, it is designed for 433MHz fixed code remotes and can copy compatible signals from your original remote.
Is this a clone remote for garage door or gate use?
Yes. It can be used for compatible garage door or gate remotes.
